Coherent Solutions MTP-1000, Руководство пользователя

Страница: 29 / 49

Modular Variable Optical Attenuator | VOA Blade
Coherent Solutions | VOA Blade (V1.4
)
35
12.5 Other Menu Buttons
Monitor
On the Home page, you can select Instruments and move it back and forth from
‘
Monitored instruments’ depending on the devices you need to monitor.
Selecting a MTP-1000 and clicking on ‘Monitor’ will navigate to the Test
Instrument Manager Interface
Firmware
If a firmware update is required, the ‘Firmware’ tab
can be used to upload the new firmware to the
instrument.
Once you select the instrument which needs an
upgrade, you can select if the upgrade has to be
done on the MTP1000 or the LaserBlade. To perform
an update of the MTP1000 system select the
component as ‘
SBC’ .
To perform an update of a LaserBlade module select
the component as
‘Blade’. The ‘Blade’ drop down
menu is used to select the specific LaserBlade
module to upgrade, which can be identified by the
slot location within the MTP1000.
Once the target
‘SBC’ or ‘Blade’ is selected use the
browse button , to locate the firmware
update file and the click on ‘Update’ to perform the
update procedure.
Figure 1 - Update Firmware Settings
I
MPORTANT
Do not power off the MTP1000 while the firmware update is taking place.
Be aware the firmware update procedure may take several minutes. Do not
try to ‘Monitor’ the unit during this time. Be sure to wait for 2-3 minutes
after the Firmware update is complete to continue.