Cognex In-Sight 1720 Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 56

background image

Installing In-Sight

®

1720 Series Wafer Readers

i

Copyright, Trademarks, Patents

The software described in this document is furnished under license, and may be used or copied only
in accordance with the terms of such license and with the inclusion of the copyright notice shown on
this page. The software, this document, nor any copies thereof may be provided to or otherwise made
available to anyone other than the licensee. Title to and ownership of this software remains with
Cognex Corporation or its licensor. Cognex Corporation assumes no responsibility for the use or
reliability of its software on equipment that is not supplied by Cognex Corporation. Cognex
Corporation makes no warranties, either express or implied, regarding the described software, its
merchantability or its fitness for any particular purpose.

The information in this document is subject to change without notice and should not be construed as
a commitment by Cognex Corporation. Cognex Corporation is not responsible for any errors that may
be present in either this document or the associated software.

This document may not be copied in whole or in part, nor transferred to any other media or language,
without the written permission of Cognex Corporation.

Cognex P/N 597-0047-01

Copyright © 2006 Cognex Corporation. All Rights Reserved.

The hardware and portions of the software described in this document may be covered by one or
more of the following U.S. patents (other U.S. and foreign patents are pending):

In-Sight

Patents pending

Hardware

4,972,359; 5,526,050; 5,657,403; 5,793,899; 5,861,910

Vision Tools

5,495,537; 5,548,326; 5,583,954; 5,602,937; 5,640,200; 5,717,785; 5,742,037;
5,751,853; 5,768,443; 5,796,868; 5,818,443; 5,825,483; 5,825,913; 5,845,007;
5,859,466; 5,872,870; 5,909,504

The following are registered trademarks of Cognex Corporation:

Cognex

Cognex, Vision for Industry
In-Sight "crosshair" logo
In-Sight

The following are trademarks of Cognex Corporation:

The Cognex logo
VAN (Vision Area Network)

Other product and company names mentioned herein are the trademarks, or registered trademarks,
of their respective owners.

«
1
2
3
4
5
...
»

Содержание In-Sight 1720 Series

























































Отзывы:

Нет отзывов

Похожие инструкции для In-Sight 1720 Series

Бренд: Valore Страницы: 4

Бренд: Bachmann Страницы: 2

Бренд: Can-Am Страницы: 16

Бренд: Hama Страницы: 22

Бренд: Camcar Страницы: 6

Бренд: Padwico Страницы: 28

My first Walker

Бренд: Jamara Страницы: 4

Бренд: Jalousie-Welt Страницы: 20

Бренд: Parker Страницы: 2

Бренд: Park Tool Страницы: 2

Бренд: ParaZero Страницы: 17

Бренд: AccuAir Страницы: 40

Бренд: Peak Страницы: 10

Бренд: ZEPP Страницы: 36

FleetMaster Air FW8 Series

Бренд: SAF-HOLLAND Страницы: 20

Бренд: AirTest Страницы: 4

Бренд: Flymo Страницы: 24

Бренд: Kingpin Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды