Cofem COMPACT LYON PLUS, Руководство пользователя

Страница: 79 / 96

Digital fire detection control panel
COMPACT LYON PLUS
79
FIRE PROTECTION MANUFACTURER
C / Compositor Wagner, 8 –P.I. Can Jardí 08191 - RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 – cofem@cofem.com – www.cofem.com
4- Set-up.
4.1- Prior verifications.
Prior to putting the
C-Lyon digital system installation into operation, we must assure ourselves that the
installation is totally completed and we have all the data for its correct programming. For this it is
necessary to verify that the points shown below have been completed:

To have a 110~230V power source available dedicated to the fire protection system and that it is live
24 hours a day, seven days a week. (see chapter 2.1)

To have a set of two 12V batteries with a capacity between 7 and 24Ah depending on the number of
loops and load connected to the control panel. (to see chapter 2.3.1)

To verify that all the elements are connected to the installation.

To verify that there are no installation elements left unconnected or with connection errors that could
cause faults when putting into operation or deterioration of the
C-Lyon digital system elements.

Do not remove the covers until the installation is finished and clean.

To have a list with the total of connected elements of each type in each loop, see example in the
following table.
LOOP: 1
TYPE AMOUNT
A30XHA
15
A30XVA 2
A30XHTCA
5
PUC-AY 10
SIRAY 1
MDAXY 6
MSTAY 1
KMAY
3
MYOA 1
TOTAL
44

To have a list for each loop with the location, type and programming number of each element,
(sensor, button, relay module, technical signals module, addressable sirens, master module).
This programming number goes from 1 to 65533, see example in the following table:
Loop: 01
POINT Prog. No. Label Type Notes
1 12757 ROOM 101 A30XHA
2 12432 ROOM 102 A30XHA
3 4767 BUTTON P1 PUCAY
4 6982 CORRIDOR P1 KMAY
In this way with the lists made on-site, that are completed with the listings of relay activation and with
the relationship of alarm zones, it is possible to undertake the system programming working with an
external keyboard, on the control panel’s own keypad or much more easily using the
I-Link program on
a PC that will later download to the control panel.