Periodically check the lubrication of all components, particularly the parts subject to
high temperatures. If necessary, lubricate with suitable lubricant (
coemar
cod.
MV
6173/1
) as shown in the following figure.
Electrical components
Check all electrical components for correct earthing and proper attachment of all
connectors, refastening if necessary.
gobos
coemar nat mm 1200 ZOOM 15/30°
utilises a ø53 mm gobo with a ø37.5mm
image, known generally as a “D” type gobo. The gobo is mounted via 3 screws with
a round mounting bracket.
Replacing gobos on the first gobo wheel
Gobos may be changed as required, though the procedure should always be perfor-
med with the unit unpowered.
1) Position the second gobo wheel (A) and the effects wheel (B) in such a manner as
to allow a screwdriver to be inserted readily as in the figure below.
2) Loosen the three screws (C), rotating the geared support (D) as required.
3) Remove the round mounting bracket (E) and replace the selected gobo.
A
B
53,3 mm
30
°
46,5 mm
n
°
3 fori Ø 1,8
