3) Press the
+
or
-
until the displayed number corresponds with the correct focusing
of the lens amongst the other
coemar nat mm 1200 ZOOM 15/30°
in the
same installation (note that with each press of
+
or
-
the focus lens will rotate).
4) Press the
enter
button to confirm your selection.
PrAL
1) Press the
+
or
-
until
PrAL
is displayed (for rotating prisms/effects wheel align-
ment) is displayed.
2) Press the
enter
button to confirm your selection. The display will show a numeri-
cal value which corresponds with the factory setting.
3) Press the
+
or
-
buttons until the displayed number corresponds with the correct
alignment of the prisms/effects wheel in the optical path of the projector (note
that with each press of
+
or
-
the prisms/effects wheel will move)
4) Press the
enter
button to confirm your selection.
END
1) Press the
+
or
-
until
END
(for completion of the electronic alignment procedure)
is displayed
2) Press the
enter
button to confirm your selection. The display will revert to its nor-
mal operating mode and the internal memory will record all changes made.
N.B.
: At the termination of the above electronic calibration procedure, if the
END
function is not performed, no memory changes will be effected. This allows the ope-
rator to abort any changes made, in case of operator error.
function display
menu
+
-
enter
function display
menu
+
-
enter
