15. Electronic alignment
The display panel at the rear of the
coemar nat mm 1200 ZOOM 15/30°
of motors
allows for the electronic alignment of the projector’s motors. This procedure is
performed by
coemar
at the factory. It may be useful to perform this procedure in
the case of internal components being replaced.
Altering the
coemar
factory settings may radically alter the functinoing of the
projector; carefully read all of the following prior to attempting any changes.
Electronic calibration
1) Press the
menu
button
2) Press the
+
or
-
buttons until
rESE
(for reset) is displayed.
3) Press the
enter
button to confirm your selection. All the motors will perform a
mechanical reset.
Simultaneously press the
menu
and
enter
buttons, whilst turning on the power
to the
coemar nat mm 1200 ZOOM 15/30°
. The display will show:
PnAl
1) Press the
+
or
-
buttons until
PnAL
(for pan alignment, X movement of the mir-
ror) is displayed.
2) Press the
enter
button to confirm your selection. The display will show a numeri-
cal value which corresponds with the factory setting.
3) Press the
+
or
-
buttons until the displayed number corresponds with the correct
alignment of the mirror (note that with each press of
+
or
-
the mirror will move).
4) Press the
enter
button to confirm your selection.
tLAL
1) Press the
+
or
-
buttons until
tLAL
(for tilt alignment, Y movement of the mirror) is
displayed.
2) Press the
enter
button to confirm your selection. The display will show a numeri-
cal value which corresponds with the factory setting.
3) Press the
+
or
-
buttons until the displayed number corresponds with the correct
alignment of the mirror (note that with each press of
+
or
-
the mirror will move).
4) Press the
enter
button to confirm your selection.
SHAL
1) Press the
+
or
-
buttons until
SHAL
(for shutter/black-out alignment) is displayed.
2) Press the
enter
button to confirm your selection. The display will show a numeri-
cal value which corresponds with the factory setting.
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
