Instructions to assemble and install
Edition E0
Page 9 of 69
Confidential and Property of CoeLux S.r.l.
-
the product has been stored in unsuitable conditions;
-
the product appears worn or damaged after transport.
•
If you have any further questions, please do not hesitate to contact CoeLux S.r.l (see last
page in this manual).
2.2.1
OPERATIONS TO AVOID
•
Carry out even partial modifications to the unit or its parts, unless expressly agreed with and
authorised in writing by the manufacturer. Any unauthorised modifications made by the
purchaser and/or installer and/or assembler and/or any other third parties to the unit will
entail the loss of the CE mark and any other certifications. In this event, the guarantee and
liabilities of CoeLux are no longer valid.
•
Open the case before disconnecting from the mains supply.
•
Carry out any improper, hazardous operations.
•
Obstruct the vents or heat dissipation outlets.
•
Use inflammable liquids near the equipment.
•
Install or repair without using qualified personnel.
•
Walk on the system, lean on it or hang on to it throug
hout the unit’s working life.
•
Repeatedly switch the unit on and off over a period of 30 seconds.
2.3
PACKAGING, HANDLING AND STORAGE
The unit is shipped in separate parts, adequately protected and packed in wooden boxes.
Some accessories may be placed in protective cardboard containers to avoid them being lost and
to facilitate transport.
As some of the parts are particularly delicate, you must take great care when loading/unloading
the packages from the transport vehicle and subsequently during handling.
Therefore, these operations must be carried out only by trained and/or qualified personnel, e.g.
crane and fork lift truck drivers.
N.B.:
The drawings and instructions, which accompany the unit, are and remain the exclusive,
intellectual property of CoeLux S.r.l., which keeps all the rights, prohibits their reproduction and
also prohibits simple, even partial sharing with third parties.