Instructions to assemble and install
Edition E0
Page 37 of 69
Confidential and Property of CoeLux S.r.l.
6.2.12
STEP 12: assembly of projector sub-group
Use the screws and M8 nuts supplied to assemble the vertical, triangular panels [30] and [31] and
fasten them to the upper panel [29] (PN 73-00029-01).
Use the screws and M8 nuts supplied to assemble the lower panel [37] (PN 73-00037-01) and
fasten it on to the two vertical, triangular panels [30] and [31] and to the upper panel [29] (PN 73-
00029-01).
Use the M6 screws supplied to assemble the closing caps [10] (PN 73-00010-01).
Use the M6 screws supplied to assemble the pieces of the compartment, which will contain the
silica-gel ([38] (PN 73-00038-01), [39] (PN 73-00039-01), [40] (PN 73-00040-01)). Then, join it
with the lower panel of the prism [37] (PN 73-00037-01). Wait for
step 15
before assembling the
lid [41] (PN 73-00041-01).
Fig. 30
Installation sequence - Step 12
Fig. 31
Installation sequence - Step 12
40
38
29
31 10
41
37
38
39
30
10