CoeLux 45 HC P M UL Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 69

CoeLux 45 HC P M UL Скачать руководство пользователя страница 59

Instructions to assemble and install

Edition E0

Page 59 of 69

Confidential and Property of CoeLux S.r.l.

The  installer  is  always  responsible  for  fastening  the  45  HC  systems  to  the  existing  structure.  It
must be carried  out by specialised personnel, who comply with the safety measures in force in
the place of installation.

Fig. 60

Suspension system for tilted dark-box

The suspension system shown here (Figure 60) has been certified by a structural engineer and is
entirely t

he installer’s responsibility. CoeLux does NOT supply this suspension system.

CAUTION:

If you do not use the CoeLux suspension kit, the installer will be responsible for the structural
certification of the new suspension system. CoeLux S.r.l. declines any liability for the use of any
alternative suspension system to the one offered.

Application of a 12 mm -thick metal
plate between the angle profile and
the tie rod plate to fasten the tie rod

Tilted threaded bars

Threaded vertical support bars with end
welded to special elements

Tightening screw

50x30x5 angle profile

Insert a 12 mm shim between
the angle profile and the tie rod
plate (Close-up D1)

100x100x6 double L profile
placed vertically compared to
the dark-box.

100x100x6 double L profile
placed horizontally compared
to the dark-box.

100x6 angle bar fastened to the
ceiling with a minimum of 2
M12 plugs (8.8)

Insert a 6 mm shim between the
longitudinal angle profile (100x100x6)
and the angle profile (50x30x5) (Close-
up D2).

«
...
57
58
59
60
61
...
»

Содержание 45 HC P M UL






































































Отзывы:

Нет отзывов