Code Party 600, Руководство пользователя

Страница: 25 / 39

20 http://www.codelight.com
6.5.2. Change into Present State
Fade in the Playback fader, you can fade in several Playback simultaneity.
Press Shift + one of Playback Flash button and change to the present state, which can be seen on the
lower part of LCD screen.
6.5.3. Change the Direction of Chase and Pause
Set the Playback to the present state first;
Press Go+ or Go- to change the direction of Chase;
Press Pause can stop the Chase and stay at the present step. Press again will continue the Chase. Note: if
the Chase step contains Effects, the Effect will run continuously.
6.5.4. Music Trigger
Set the Playback to the present state first;
Press Music Trigger, then the led of button will turn on and the Chase steps will follow the rhythm of the
music. Press [Music Trigger] again, the led will be off, and the Chase steps will run as the preset speed;
Press Pause can stop; and press Go+ or Go- can change the direction of the Chase.
6.5.5.
Performing Global Time
User can change the Global time of each Playback:
Set the Playback to the present state first;
Press S2 and select [Time Edit];
Select the Playback needed to adjust timing, and change
3 of the timing parameters according to your needed.
Each Playback global tim e contains 3 timing:
1. HTP Fade In --- the time a step spend on the HTP Fade in.
2. LTP Fade in --- the time of all the LTP Fade in of the Playback.
3. LTP Wait --- the time between the beginning of a step and the beginning of an LTP Fade in.
The adjusted global time will be saved automatic, which availability for the selected Playback and instead of
the default independent time of the Ch ase steps only. However, the adjusted Chase step independent time is
impregnable.
6.5.6. Change the Speed of Playback temporarily
User can adjust the running speed of the Playback when performing
：
Fade in the fader to run Playback;
Press S1 and enter [PLAYBACK];
Press S1 and enter [PB Speed];