Cocoon HE150272 Скачать руководство пользователя страница 53

Страница: 53 / 60

After Sales Support

1300 663 907

Model Number

HE150272

Model appears very ‘stringy’
• Ensure that the filament diameter is set to match your filament spool (1.75mm), then try

creating a new GCODE before printing again

• Check you are using the correct temperature for the filament used

Print stopped halfway
• Check that the GCODE file is complete and not corrupt
• Check the original model file

The motor does not stop at the end of axis
Check that the stop micro switches are aligned with the motor mount and registering.

The print head/bed does not move
• Check the part can be moved by hand when stepper motor is disabled. Clear anything that is

blocking the path

• Check that the motor is turning (using position menu). If motor turns but belt does not, you will

need to tighten the gear motor gear nut. Please visit cocooncreate.com.au/3dprinter/videos

10.2 Connectivity Problems

My 3D Printer isn’t turning on
Check that you have correctly inserted the power cable into the rear of the Control Box, the power
cord is plugged into the mains outlet and that the Control Box power switch is on.

Micro SD Card not shown
Navigate to SD Card, select Unmount SD Card, then select Mount SD Card. Your Micro SD card
should now appear in the menu.

Troubleshooting

Содержание HE150272





























































Результаты поиска

Содержание HE150272

Отзывы:

Похожие инструкции для HE150272

Бренды по названию

Популярные бренды

Cocoon HE150272, Инструкция по эксплуатации

Результаты поиска

Содержание HE150272

Отзывы:

Похожие инструкции для HE150272

Бренды по названию

Популярные бренды