Cocoon HE150272 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 60

background image

29

After Sales Support

1300 663 907

Model Number

HE150272

[email protected]

Setup

3.3 Removing Filament:

1. With the printer initialised, press the Navigation Dial to enter the menu system.
2. Navigate to, and select Quick Settings > Preheat PLA or Preheat ABS depending on the

material.

3. Wait for the 3D printer to automatically return to the home screen, after approximately 15-30

seconds.

4. Check the temperature of the Extruder and plate on the LCD. When the temperatures are

within a few degrees of the target, you are ready to remove the filament.

NOTE:

Preheat PLA/Preheat ABS will still be shown, even after temperatures have been reached.

5. Depress the Extruder spring lever. Push down on the filament gently so that it starts to

extrude from the nozzle.

6. When filament is extruding, quickly, but gently pull the filament upward. If it is done correctly,

the end of the filament will pull out into a thin hair like strand.

NOTE:

The aim is to sever the filament where is it soft (inside the nozzle). Swift upward action will

ensure that the filament does not cool down before exiting the nozzle inlet. If the filament gets stuck,

please see the troubleshooting section.

3.4 Storage:

Both PLA and ABS filaments are sensitive to moisture. If stored in a humid environment, the quality
of the filament can deteriorate, with a tendency to bubble and spurt from the nozzle tip. This will
affect print quality, so when storing PLA or ABS for an extended period of time, follow these tips.
• Store in a sealed, air tight bag/container. We recommend a vacuum seal bag
• Store with a silica gel (moisture absorber) pack. One is included with each filament spool

4. Using the Micro SD Card

4.1 Loading files from your Computer:

1. Insert your MicroSD Card into a card reader or memory card slot and connect to your

computer (refer to your computer manual for further instructions if required)

2. The Micro SD Card will appear as a folder (refer to your computer manual for further

instructions if required)

3. Copy your converted GCODE files to the Micro SD card, then safely remove

.

«
...
27
28
29
30
31
...
»

Содержание HE150272





























































Отзывы:

Нет отзывов

Похожие инструкции для HE150272

Color imageRUNNER LBP5970

Бренд: Canon Страницы: 67

Color imageCLASS MF8280Cw

Бренд: Canon Страницы: 36

imagePROGRAF iPF8300

Бренд: Canon Страницы: 16

Бренд: MAKERGEAR Страницы: 8

Бренд: Oki Страницы: 154

Бренд: Oki Страницы: 121

Бренд: Oki Страницы: 96

3250D - Phaser B/W Laser Printer

Бренд: Xerox Страницы: 12

Бренд: Xerox Страницы: 4

Бренд: Xerox Страницы: 12

Бренд: Oki Страницы: 24

Бренд: Canon Страницы: 20

PIXMA TS9100 Series

Бренд: Canon Страницы: 100

Бренд: Canon Страницы: 100

Бренд: Canon Страницы: 105

Pixma G1010 Series

Бренд: Canon Страницы: 16

Бренд: Canon Страницы: 14

iP1500 - PIXMA Color Inkjet Printer

Бренд: Canon Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды