Cochran Nemesis IIa NITROX, Руководство пользователя

Страница: 74 / 79

74
CONFIGURATION
STANDARD
Dive Time/date Stamp: This is the internal clock setting that is used to timestamp
each individual dive. The time displayed is the recorded time when you began the
current uploading of your dive computer. To change the setting of the clock, highlight
this option and press <ALT + D>. The program will now set your dive computer's clock
to your Personal Computer's internal clock. If you want to change it from this setting,
use the <BACKSPACE> key to erase the setting and enter the desired setting. This
manual entering of the DATE and TIME STAMP must follow the same format by enter-
ing day/month/year and then time in hours/minutes/seconds. Press <ENTER> to
save the setting.
Displayed Measurement Units: This identifies whether you dive computer is pro-
grammed to display tank pressure, depth and temperature measurements in metric
or imperial units. Use the left or right mouse button to toggle between the two choices.
When the desired setting is displayed, press <ENTER>.
Tank Pressure Metric Measurement Units: If you computer is set to display in the
metric mode, you may select either BAR or kg/cm2 to determine the units in which
pressure is displayed. Use the left or right mouse button to toggle between the two
choices. When the desired setting is displayed, press <ENTER>.
Profile Store Period: This selection determines the resolution in which your dive
profiles are created. You may select from 1 second to 30 second resolution. For each
1 second of profile store period, you gain 13 hours of profile storage space (bottom
time). As long as you upload to this program within the profile storage space, the
Analyst will append or "add" to the previous profiles. It is recommended that you select
the highest resolution profile store period that will provide ample time between up-
loads. To make this entry, highlight this option with the middle mouse button and
using the keyboard, enter the desired profile store period and press <ENTER>.
Logbook Viewing Time: This option will allow you to select the number of seconds
each logbook display is shown before time-out. To change this "timer", use your PC's
numeric keypad to enter the desired number of seconds, from 10 to 60 and press
<ENTER>.
PreDive Planning Maximum Depth: This option allows you to enter the maximum
depth that will be predicted during the Predive Prediction Mode. You may enter this
maximum depth in 10 foot increments from 30 to 320 feet. To make this entry, highlight
this option with the middle mouse button and using the keyboard, enter the desired
setting and press <ENTER>.
Enter Wrist Unit Serial Number: This option allows you to program you Tank Unit to
communicate with a different Wrist Unit. The Tank Unit can only communicate with
one Wrist Unit at a time. Once you have changed this serial number, the previous
Wrist Unit will no longer receive the data being transmitted by the Tank Unit.