Cochran Nemesis IIa NITROX, Руководство пользователя

Страница: 67 / 79

67
PROFILES
The PROFILES menu provides you with different profiles relating to your dive. These
are:
DEPTH / TANK PRESSURE
DEPTH / BREATHING PARAMETER
DEPTH / ASCENT RATE
DEPTH / TEMPERATURE
DEPTH / NITROX PPO2
DEPTH / NITROX CNS%
DEPTH / NITROX OTU%
The Depth graph will remain constant regardless of a selected profile screen for a
particular dive with its scale displayed on the far left of the graph. This scale is auto-
ranging in 25 foot increments. The maximum recorded depth of the dive will deter-
mine the scale. The second-by-second average of depth is displayed as a horizontal
dark blue line.
The second piece of data, whether it be tank pressure, breathing parameter, etc., will
be displayed in a light green with its scale displayed on the far right of the graph.
Depending upon what data is being displayed, this scale will change to reflect the
proper values. The average value of each of the secondary data profile displays is
displayed as a dark green horizontal line.
Each of these graphs may have the jaggedness smoothed out by pressing the num-
ber 0 - 9 keys with 0 being no smoothing and 9 being maximum smoothing. You may
also magnify a given area of the graph (see section titled MAGNIFICATION OF AN
AREA for more information). On the bottom of the profile, you may see very short
colored vertical lines. These lines refer to different warnings that the dive computer
has posted. Should you move the left marker line over one of these little vertical lines
the graphic screen informs you as to what type warning was issued.
At the bottom of each Profile you will see small vertical marks of various colors. Each
mark represents either a warning that was issued during a dive or a mix switch that
occurred during the dive. By using your mouse, you are able to move a marker into the
display area. To do this, position the mouse pointer at the desired location of the
graph and press the left mouse button. This marker is identified as the Left Marker. A
white, vertical marker will appear. You can move this marker by holding the left mouse
button down and moving the mouse to the new desired location. If you do not have a
mouse, the arrow left and arrow right keys will accomplish the same task.
Once you have intersected a colored mark, the warning or mix switch will be identified
at the bottom center of the screen as well as identifying the depth and secondary data
readings calculated at the particular moment.
You also have the ability to move a Right Marker into the graph by pressing and holding
down the right mouse button. It is controlled in the same manner as the Left Marker.
If you do not have a mouse, the Alt+left arrow and Alt+right arrow will accomplish the
same task.