Cochran Nemesis IIa NITROX, Руководство пользователя

Страница: 65 / 79

65
UPLOADING DIVE DATA
After the Data Probe is installed on the dive computer and the program is installed on
the Personal Computer (PC), you are ready to upload dive data to a file on the PC. To
do this from the C:\ANALYST> prompt, type:
ANALYST and press <ENTER>
NOTE: Once you are in the ANALYST program, you may press F1 at anytime for HELP.
If you are requesting help for a specific Menu item, highligh the item and then press
F1.
FILES
You will now need to open the FILES section to allow you to create, upload, or view your
data files. .
To access the FILES section you can either use your mouse to select the menu option.
When the FILES changes color from blue to red, depress and hold the left mouse
button and drag the cursor “down” until the item you want to perform is selected, then
release the left mouse button.
You may also access the FILES section by pressing on the keyboard <ALT + F>. Then
use the up and down arrow keys to select the item you wish to perform.
Should you desire to CREATE, UPLOAD, or VIEW file information, the Analyst package
will display a list of existing files that you may select from. DO NOT include the extension
.ANA when you enter the filename.
Please enter name of new file to be created:
At this point, if you enter a file name (using up to eight characters or numbers) from the
list of files displayed. The file name you create will correspond to one specific dive
computer only. If data from more than one dive computer is going to be stored on your
PC, you will need a unique name for each dive computer. You might incorporate the
name of the dive computer’s owner (“TOMSFILE”) or the Tank Unit SERIAL NUMBER
(“1234FILE”). The program will automatically add the file extension of .ANA.
NOTE: The dive computer which first uploads data to a given file will be permanently
associated with that file. You will not be able to upload from any other dive computer
using that specific filename.
If you are uploading a filename which already exists, the PC will prepare to upload data
from that dive computer, then prompt you to position the Data Probe on the dive computer
and press any key to continue. The Analyst will create a back-up file to protect the
previously stored data. This back-up file will be identified by the .BAK extension instead
of .ANA.
While the data is being transferred, a counter will appear and begin rapidly counting
upward. If this counter does not appear, or if it appears but does not increment after a
few seconds, exit the program using the <ESC> key or you may select the FILES menu
option and select EXIT to begin again.