8
4.2. Arming / disarming of the full security system without
Biker Recognition
function (use as a conventional transmitter)
To activate the full system (6829 = immob alarm, 6809 = alarm), press push-button n. 1
of the transmitter once. This can be done also if the immobiliser has already armed passively
(Spyball 6829).
Arming is confirmed by:
Three short flashes of the turn indicators.
Three sharp sound signals (if this function is enabled
– see paragraph 14) (*)
The dashboard LED lights up.
The LED permanently illuminates for about 60 seconds. This is the
arming period,
which
allows for the stabilisation of the control unit (first 25 seconds) and for subsequent testing of
the functions (35 secs)
– see paragraph 8.2.,
“Check control
function”.
Once this period has elapsed, the LED starts flashing to indicate that the system is fully active.
The immobiliser is already operational during the arming period.
To deactivate the full system (6829 = immob alarm, 6809 = alarm), press push-button n.
1 of the transmitter once.
Disarming is confirmed by:
A long flash of the turn indicators (**)
A deep sound signal (if this function is enabled
– see paragraph 14)
The dashboard LED extinguishes.
If disarming is not followed by starting the vehicle, the immobiliser will re-arm as described in
paragraph 4.1 (Spyball 6829).