21
ONCE ALL THE DIGITS HAVE BEEN ENTERED CORRECTLY, THE SYSTEM DISARMS
WITH A LONG BLEEP AND THEN SWITCHES TO
SERVICE MODE
(see paragraph 12).
16.1. Reading the
PIN code
If you have lost the
PIN code
but you have a working transmitter, you can recover the code
with this simple procedure:
While the system is disarmed, turn ignition on then press and hold down push-
button n. 1 of the transmitter about 7 secs.
The LED illuminates about 3 seconds,
then it switches off for a short time and subsequently displays 4 sets of flashes.
Count and note the number of flashes in each set. Those are the numbers of the
PIN code
.
The end of the reading is confirmed by a short sharp audible signal.
16.2.
Changing the
PIN code
If you wish, you can replace the original
PIN code
with one of your choice. The procedure is
described below:
While the system is disarmed, turn the ignition on then press and hold down push-
button n. 1 of the transmitter about 7 seconds.
The LED illuminates about 3
seconds.
During this lapse of 3 seconds, press push-button n. 2.
A short sharp audible
signal confirms you have entered the procedure. The LED extinguishes, then it
starts to flash slowly.