7
If you expect to leave this function unused for a long time, you are strongly recommended to at
least deactivate it from the transmitter, because this reduces the battery drain considerably
and prolongs the life of the battery.
(*): to avoid accidental arming (which may occur if the two buttons are not pressed exactly at
the same time), carry out this operation at a distance from the motorcycle, beyond the range of
the receiver.
4.
ARMING / DISARMING OF THE SECURITY SYSTEM
4.1. Passive arming / disarming of the engine immobiliser (applies only to
model 6829*)
To conform
with the British Insurance Industry’s Criteria for cat. MC1 security systems,
the
immobiliser section always activates automatically
27 secs after the motorcycle’s ignition
has been turned off, whether the full system is activated or not. This is confirmed by a short
flash of the turn indicators.
To disarm the engine immobiliser
, turn the ignition on, wait for the LED to start flashing
quickly, then press push-button n. 1 of the transmitter (there is no need to press the button if
the Biker Recognition function is activated). Disarming is confirmed by a long flash of the turn
indicators.
(*): The 6809 has no immobiliser function. It is a Thatcham cat. MC2
1 alarm upgrade,
intended for fitment to motorcycles pre-equipped with a cat. 2 immobiliser.
