16
will allow you to temporarily disable automatic arming / disarming and the anti-hijack function
without entering the selection procedure (
Service
set-up).
Disarm the system via the emergency disarming PIN code (see paragraph16).
The system
sets itself to
service mode:
-
The Biker Recognition signal is over-ridden, the alarm will not activate automatically;
-
The immobiliser remains active (Spyball 6829).
The
Biker Recognition
operation mode will be reinstated the first time push-button n. 1 is
pressed again. In the meantime you will hear four short sharp audible reminder signals every
time the ignition is turned off.
13.
”TURN INDICATOR ON”
AUDIBLE WARNING SIGNAL
This ancillary function does not relate to anti-theft protection, but it can make riding easier and
safer. If you enable it, the system will remind you with audible warning signals after a turn
indicator has been flashing for more than 24 seconds.
The procedure of selection is described in paragraph 14.
14. SELECTABLE FUNCTIONS
– ENABLING AND DISABLING PROCEDURES
The functions listed below are selectable and can be enabled or disabled as chosen by the
user. The set-up is stored until a different configuration is selected.
-
Biker Recognition
(see paragraph 3)
-
On/off audible signals (see paragraph 4)
-
“Turn indicator on”
audible warning signal (see paragraph 13)
