background image

ASSEMBLER / INSTALLER:

Leave these instructions with the consumer.

CONSUMER / USER:

This instruction manual contains important information necessary for the proper assembly
and safe use of this appliance.  Read and follow all warnings and instructions before 
assembling and using this appliance.  Follow all warnings and instructions when using this 
appliance.  Keep this manual for future reference.

DANGER:

If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open door.
4. If odor continues, keep away from the  
    appliance and immediately call your fire
    department. If a fire should occur, keep
    away from the appliance and call your fire
   department.  Do not  attempt to extinguish
    an oil or grease fire with water.

DANGER:

1. Never operate this appliance unattended.

2. Never operate this appliance within 10

    feet (3.05M) of any other gas cylinder.

3. Never operate this appliance within 25

    feet (7.5m) of any flammable liquid.

Failure to follow these instruction could result in fire, explosion or burn hazard, 

which could cause property damage, personal injury or death.  

IM3425

3425GW/3495GW 

3425BGW/3495BGW

VERTICAL GAS

SMOKER

Summary of Contents for Great Outdoors Smoky Mountain 3425GW






























Reviews: