COBHAM SAILOR 6120, Руководство по установке

Страница: 30 / 116

Chapter 2: Install the system
18 Install the SAILOR 3027
You may use the adjustable pole/railing mount as an alternative to the pole
mount. See the next section for details.
2.3.2.2 Adjustable pole/railing mount 1” and 1½” (optional)
The adjustable pole/railing mount kit is available from Cobham SATCOM
(see
Available parts on page 91). When mounting the adjustable
pole/railing mount follow the instructions included with the kit. The
adjustable pole/railing mount fits 1” and 1½” poles and can be mounted on
a vertical or horizontal pole.
Do as follows:
1. Attach the pole/railing mount to the pole using the included nuts and
spacers. The drawings on the next page show the vertical and the
horizontal assembly.
2. Tighten the nuts.
3. Place the large spacer between the SAILOR 3027 and the pole/railing
mount.
4. Fasten the SAILOR 3027 to the pole/railing mount using the 3 screws
and spacers.
5. Tighten the screws to torque
1.5 - 2.5 Nm
.
6. Connect the CAN cable to the connector in the bottom of the SAILOR
3027.
7. Mount cable relief for the CAN cable.
Note You cannot access the CAN connector when the pole mount
adapter is mounted on the SAILOR 3027. If at a later stage you
need to disconnect/connect the cable, the pole mount adapter
must first be removed from the terminal.