Cobalt Digital Inc 9084 Скачать руководство пользователя страница 7

Страница: 7 / 66

9084-OM (V4.0)

9084 PRODUCT MANUAL

1-3

Introduction

Manual Conventions

Manual Conventions

In this manual, display messages and connectors are shown using the exact
name shown on the 9084 itself. Examples are provided below.

•

Card-edge display messages are shown like this:

•

Connector names are shown like this:

SDI IN

In this manual, the terms below are applicable as follows:

•

9084 refers to the 9084 HD/SD-SDI RGB Color Corrector with
YCbCr Video Proc and Frame Sync card.

•

Frame refers to the 8310 (or similar) frame that houses the Cobalt

COMPASS™ cards.

•

Device and/or Card refers to a COMPASS™ card.

•

System and/or Video System refers to the mix of interconnected
production and terminal equipment in which the 9084 and
COMPASS™ cards operate.

Warnings, Cautions, and Notes

Certain items in this manual are highlighted by special messages. The
definitions are provided below.

Warnings

Warning messages indicate a possible hazard which, if not avoided, could
result in personal injury or death.

Cautions

Caution messages indicate a problem or incorrect practice which, if not
avoided, could result in improper operation or damage to the product.

Notes

Notes provide supplemental information to the accompanying text. Notes
typically precede the text to which they apply.

E201

Содержание 9084



































































Результаты поиска

Содержание 9084

Отзывы:

Cobalt Digital Inc 9084, Руководство по эксплуатации продукта, Страница: 7 / 66

Результаты поиска

Содержание 9084

Отзывы: