Cobalt Digital Inc 9084 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 66

Cobalt Digital Inc 9084 Скачать руководство пользователя страница 46

3

9084 Function Submenu List and Descriptions

3-22

9084 PRODUCT MANUAL

9084-OM (V4.0)

Framesync

Provides video Frame Sync and delay control tools.

• Framesync Enable

Disables the Frame Sync function, or selects from choices below.

• Off: Disables Frame Sync function; output video timing matches the

input video timing.

• Reference 1: Allows Frame Sync function to use external

Reference 1 as the reference standard.

• Reference 2: Allows Frame Sync function to use external

Reference 2 as the reference standard.

Note: If Reference 1 or Reference 2 is selected and an

appropriate external reference is not received, the

indication appears in the Card Info

status portion of DashBoard™, indicating invalid frame sync
reference error. (Additionally, the card edge ERR indicator
illuminates indicating the same.) External reference signals
Reference 1 and Reference 2 are distributed to the card
and other cards via an 8310 frame bus.

• Input Video: Uses the input video signal as the

reference standard.

Note: If Input Video is used for framesync, any timing instability

on the input video will result in corresponding instability on
the output video.

• Vertical Delay Control

When Framesync is enabled, sets vertical delay (in number of lines of
output video/format) between the output video and the frame sync
reference.

(Range is -1124 thru 1124 lines.)

Note: Lines refer to lines in the output video format, and not to the

reference format.

• Horizontal Delay Control

When Framesync is enabled, sets (in µsec of output video timing)
horizontal delay between the output video and the frame sync reference.

(Range is -64.000 thru 64.000 µsec)

Note: When an external framesync reference is used, the card will not

produce a framesync reset until the variance between framesync
reference and output video exceeds ± 2 clock periods. Therefore, a
framesync reset will not result if offsets within this window are
applied.

To apply an offset/framesync reset within this window, first apply a
relatively large offset, then apply the target smaller offset.

Example: To apply a 1-period offset, first apply a 10-period positive
offset and then apply a 9-period negative offset. This results in the
target 1-period offset being applied to the output video.

Table 3-2

9084 Function Submenu List — continued

«
...
44
45
46
47
48
...
»

Содержание 9084



































































Отзывы:

Нет отзывов