manualshive.com logo in svg

Cobalt Digital Inc 9084, Руководство по эксплуатации продукта, Страница: 63 / 66

Поделиться
Скачать
Cobalt Digital Inc 9084 Скачать руководство пользователя страница 63

9084-OM  (V4.0)

9084 PRODUCT MANUAL

3-39

Operating Instructions

Troubleshooting

9084 Processing Error Troubleshooting

Table 3-5 provides 9084 processing troubleshooting information. If the 9084 
card exhibits any of the symptoms listed in Table 3-5, follow the 
troubleshooting instructions provided.

In the majority of cases, most errors are caused by simple errors where the 
9084 is not appropriately set for the type of signal being received by the card.

Note:

The error indications shown below are typical for the corresponding error con-
ditions listed. Other error indications not specified here may also be displayed 
on DashBoard™ and/or the 9084 card edge status indicators.

Note:

Where errors are displayed on both the 9084 card and network remote con-
trols, the respective indicators and displays are individually described in this 
section. 

Table 3-5

Troubleshooting Processing Errors by Symptom

Symptom

Error/Condition

Corrective Action

• DashBoard™ shows Video 

yellow icon and Input Invalid 
message in 9084 Card Info 
pane.

• Card edge Input Format LEDs 

show continuous cycling.

No video input present

Make certain intended video source is 
connected to appropriate 9084 card video input. 
Make certain BNC cable connections between 
frame Rear I/O Module for the card and signal 
source are OK.

• DashBoard™ shows Frame 

Sync red icon and Reference 
Invalid message in 9084 Card 
Info pane.

• Card edge red ERR indicator 

illuminated.

Frame sync reference not 
properly selected or not being 
received

• If external frame sync reference is not 

intended to be used, make certain the 
Framesync Enable selection list is set to Off 
or Input Video as desired. 

• If external frame sync reference is intended to 

be used, make certain selected external 
frame sync reference is active on frame sync 
8310 frame bus. (External reference signals 
Reference 1 and Reference 2 are distributed 
to the 9084 and other cards via an 8310 
frame bus.) Refer to Framesync function 
submenu tab on page 3-22 for more 
information.

Содержание 9084



































































Отзывы:

Нет отзывов