Cobalt Digital Inc 9084 Скачать руководство пользователя страница 24

Страница: 24 / 66

Setting Up 9084 Network Remote Control

2-4

9084 PRODUCT MANUAL

9084-OM (V4.0)

Figure 2-2 Rear I/O Module Installation

Setting Up 9084 Network Remote Control

Perform remote control setup in accordance with Cobalt

reference guide

“COMPASS™ Remote Control User Guide” (PN 9000RCS-RM).

Note:

• If network remote control is to be used for the frame and the frame has not

yet been set up for remote control, Cobalt

reference guide COMPASS™

Remote Control User Guide (PN 9000RCS-RM) provides thorough infor-
mation and step-by-step instructions for setting up network remote control of
COMPASS™ cards using DashBoard™. (Cobalt

OGCP-9000 and

OGCP-9000/CC Remote Control Panel product manuals have complete
instructions for setting up remote control using a Remote Control Panel.)

Download a copy of this guide by clicking on the Support>Downloads link

at www.cobaltdigital.com and then select DashBoard Remote Control Setup
Guide as a download, or contact Cobalt

as listed in Contact Cobalt Digital

Inc. (p. 1-15).

• If installing a card in a frame already equipped for, and connected to

DashBoard™, no network setup is required for the card. The card will be dis-
covered by DashBoard™ and be ready for use.

DSCN3483A.JPG

Align and engage mounting tab on Rear
I/O Module with the module seating slot
on rear of frame chassis.

Hold top of Rear I/O Module flush against
frame chassis and start the captive screw.
Lightly tighten captive screw.

DSCN3487A.JPG

Содержание 9084



































































Результаты поиска

Содержание 9084

Отзывы:

Cobalt Digital Inc 9084, Руководство по эксплуатации продукта, Страница: 24 / 66

Результаты поиска

Содержание 9084

Отзывы: