Cobalt Digital Inc 9084 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 66

Cobalt Digital Inc 9084 Скачать руководство пользователя страница 14

1

9084 Functional Description

1-10

9084 PRODUCT MANUAL

9084-OM (V4.0)

Note:

Although the OGCP-9000 Remote Control Panel can be used with the 9084,
the OGCP-9000/CC Remote Control Panel is specifically designed for use
with 9084 cards and provides the most intuitive and simplest interface of all
the methods described.

9084 Rear I/O Modules

The 9084 physically interfaces to system video connections at the rear of its
frame using a Rear I/O Module.

All inputs and outputs shown in the 9084 Functional Block Diagram (Figure
1-1) enter and exit the card via the card edge backplane connector. The
Rear I/O Module breaks out the 9084 card edge connections to BNC
connectors that interface with other components and systems in the signal
chain.

These required BNC connections are provided by either an 8310-BNC or
8310-C-BNC frame (which both have a built-in BNC connector backplane
module), or by using an optional RM-9084-A Rear I/O Module.

Video Formats Supported by the 9084

The 9084 supports all current SMPTE standard SD and HD video formats.
Table 1-1 lists the video formats supported by the 9084.

Table 1-1

Supported Video Formats

Raster Structure

Frame Rate

1080psF

23.98; 24

1080p

23.98; 24

1080i

(1)

25; 29.97; 30

720p

23.98; 24; 25; 29.97; 30; 50;
59.94; 60

486i

(1)

29.97

575i

(1)

25

(1) All rates displayed as frame rates; interlaced (“i”) field rates are two times the rate

value shown.

«
...
12
13
14
15
16
...
»

Содержание 9084



































































Отзывы:

Нет отзывов