background image

 

39 

SECTION 01  
INTRODUCTION & IMPORTANT SAFETY INSTRUCTIONS  

INTRODUCTION 

Congratulations! You have purchased a Spa with an EcoClean system, 
one of the most technologically advanced spa sanitation systems in the 
world. 

IMPORTANT SAFETY INSTRUCTIONS 

READ AND FOLLOW ALL INSTRUCTIONS 

 
EQUIPMENT RELATED, INSTALLATION AND GENERAL USE:  
Installation of all EcoClean models 
 
When installing and using the EcoClean unit, basic safety precautions 
must always be followed, including the following: 

 

WARNING

 Risk of electrical shock. Plug the unit into an ap-

proved G.F.C.I. electrical outlet (110VAC ONLY). 
 

WARNING

 Do not use spas or hot tubs unless all suction 

grates are installed to prevent body and hair entrapment. 
 

WARNING

 To reduce the risk of electric shock, replace dam-

aged cords immediately. 
 

WARNING

 To reduce the risk of electric shock, do not use 

extension cords to connect unit to electrical supply. 

 

 

People using medication and/or having an adverse medical history should 

consult a physician before suing a spa or hot tub. 

 

People with infectious diseases should not use a spa or hot tub. 

 

The maximum spa water usage temperature is 40°C (104°F). Duration in spa 

water at 40°C (104°F) should not exceed 15 minutes. Lower water tempera-

tures are recommended for young children and when spa use exceeds 10 

minutes. 

 

Water temperatures in excess of 40°C (104°F) may be dangerous to your 

health. 

 

Pregnant or possibly pregnant women should consult a physician before using 

a spa or hot tub. 

 

Since excessive water temperatures have a high potential for causing fetal 

damage during the 1st trimester of pregnancy, pregnant or possibly pregnant 

women should limit the spa water temperatures to 38°C (100°F). 

 

The use of alcohol, drugs, or medication before or during spa or hot tub use 

may lead to unconsciousness with the possibility of drowning. 

 

Obese persons and persons with a history of heart disease, low or high blood 

pressure, circulatory system problems, or diabetes should consult a physician 

before using a spa/hot tub. 

 

Persons using medication should consult a physician before using a spa or hot 

tub since some medication may induce drowsiness while other medication may 

affect heart rate, blood pressure, and circulation. 

 

Do not use a spa or hot tub immediately following strenuous exercise. 

 

Prolonged immersion in a spa or hot tub may be dangerous to your health. 

 

OWNER’S MANUAL 

2017 

WARNING

 To reduce the risk of injury do not permit children to use this 

product unless they are closely supervised at all times. Children should 
not use spa or hot tub without permanent adult supervision. 
 

WARNING

 Risk of Accidental Drowning. Extreme caution must be exer-

cised to prevent unauthorized access by children. To avoid accidents, 
ensure that children cannot use a spa or hot tub. 
 

DANGER

 To reduce the risk of injury, do not remove the suction grates. 

Never operate a spa or hot tub if the suction grates are broken or miss-
ing. Never replace a suction grate with one rated less than the flow rate 
marked on the equipment assembly. 
 

DANGER

 Risk of Electrical Shock. Do not permit any electrical appliance 

such as a light, telephone, radio or television within 1.5m (5 feet) of spa 
or pool. 
 

To avoid injury, exercise care when entering or exiting the spa or hot tub. 
 

WARNING

 The use of alcohol or drugs can greatly increase the risk of 

fatal hyperthermia in hot tubs and spas. 
 
Consult your spa/hot tub manufacturer’s manual for the proper adjust-
ment of water temperature. Prolonged immersion in hot water may in-
duce hyperthermia. Hyperthermia occurs when the internal temperature 
of the body reaches several degrees above the normal body temperature 
of 37°C (98.6°F). Hyperthermia symptoms include drowsiness, lethargy, 
and an increase of internal body temperature. 
 

The effects of hyperthermia include: 

 

unawareness of impending hazard 

 

 

physical inability to exit the spa 

 

failure to perceive heat 

 

 

fetal damage in pregnant women 

 

failure to perceive the need to exit the spa/hot tub 

 

 

unconsciousness and danger of drowning 

 

EXPOSURE TO DIRECT SUNLIGHT 

Spas that are exposed to large amounts of direct sunlight will also burn 
through sanitizer at a higher rate. Ensure that the cover is closed when 
the spa is not in use and that the air control dials on the topside of the 
spa are also closed as this too will reduce your sanitizer levels if left on. 

SECTION 02 
SPECIFICATIONS 

The operation of the Eco Clean system is very dependant of the water 
chemistry in your spa. Proper spa water conditions need to be in place to 
ensure that the system will perform at its best. 
 
The EcoClean is designed to maintain the sanitizer level while the spa is 
not in use. If the bather load increases and/or the temperature are always 
set to 40°C (104°F), then there may be the need to add sanitizer as a 
supplement.The EcoClean runs in 30 minute cycles. There is an Output 

Содержание Coast Spas with hydro Cyclonic Filtration Sydtem










































Отзывы: