HANDBOOK (V
4.0)
COMPLETE CONTROL SYSTEM GEN2
23
Connect the EMG Interface Cable
The gray jacketed cable is the EMG Interface Cable. One end of this cable has a wide connector that mates with
the
Complete Controller
while the other end will be your EMG interface of choice, e.g. a set of ring-terminal
eyelets, snap connectors, or perhaps even an EMG cuff. In most assemblies, it will make sense to attach the
EMG interface end to Dome Electrodes mounted in the socket/liner first.
To connect the EMG Interface Cable to the controller, line up the arrows on the bottom labels that point directly
at each other and push the connector on until it clicks in place. Note there are NO logo parts printed on the
EMG Interface Cable connector nor the EMG connection half of the
Complete Controller
.
Foreign material in cable interconnects.
Ensure cable interconnects are free of foreign
material before connecting device components together and connecting the device to power
or the prosthetic components. Presence of foreign material in cable interconnects can cause
damage to the device, resulting in device malfunction and minor injury to the user.
