17
EN
G
LI
S
H
Loosen
Tighten
4. Press the spindle lock (17) with one hand and turn the blade with the other
until the blade is locked, keep the spindle lock pressed and use a key to loosen
the blade bolt (turn clockwise).
5. Remove the blade bolt and the outer blade flange completely.
6. Remove the saw blade from the inner blade flange and take out the saw blade.
7. Install the new saw blade in the opposite order.
8. Be careful to clean the blade flange and bolt before installing. The rotation
direction of the saw blade must correspond to the arrow on the saw house.
9. Install the sliding blade guard (6) in the opposite order.
10. Make sure that the spindle lock is released.
11. Check that all covers are correctly installed and functioning well before the
saw is started.
Note:
The spindle has a diameter of 16 mm and an inset ring is
installed together with the original blade which has an inside diameter of
30 mm – Blades with both 16 and 30 mm inside diameter can be used.
Caution:
Always make sure that the blade runs freely in all possible settings
after you have replaced the saw blade.
Caution:
Remove the key and loosen the spindle lock before the machine
is started.
