8
EN
G
LI
S
H
39. Clamp round workpieces with appropriate devices, so that they cannot rotate.
40. Never saw through workpieces containing nails or other foreign objects.
41. Always stand at the side of the saw blade while the machine is in use, so that
the blade does not strike you if it should brake.
42. Always press the workpiece against the table and the fastening device so that
it cannot turn or move during the sawing.
43. Never saw through several workpieces simultaneously.
44. Never try to remove dust, flakes, or wood that has attached itself while the
blade is rotating. If you must adjust the machine or remove debris, always first
turn the machine off and unplug it.
45. Always turn the machine off and unplug it before changing, adjusting, or
cleaning the machine, or measuring the workpiece to be sawed.
46. Turn the machine off and unplug it before leaving the work place.
47. Electric installation, repairs, and maintenance should only be performed by
a professional.
48. All covers and safety devices must be restored immediately after repair
or maintenance.
49. It is important to adhere to the safety, use, and maintenance instructions of the
manufacturer, as well as to adhere to the dimension instructions indicated in
“technical data.”
50. It is necessary to adhere to the rules of the Labour Protection Board as well as
other general safety rules.
51.Only use the machine with dust suction in a closed room, if the room has
inflowing air, to avoid creating a vacuum in the room.
52. The saw should only be connected to sockets with 230 V secured with at least
a 10 A fuse.
53. Damaged safety devices and parts must be replaced or repaired by a
professional at an authorized service facility.
54. This machine complies with all relevant safety regulation. The machine must
only be repaired by a professional at an authorized service facility using
original spare parts. Unless you adhere to this rule, it may lead to accidents
and expose the user to danger.
