1
EN
G
LI
S
H
2
1
13
1
2
13
Cutting with the blade
at an angle of 0° - 45°
You can cut at an angle of 0°- 45° with this saw.
1. Loosen the locking lever (13) after which
the blade can be leaned in the desired
angle with the help of the scale (15).
2. Pull the locking lever (13) tight.
3. Cut according to the directions above.
Fine-tuning of the 0° and 45° angles
1. Loosen the locking lever (13) and angle to
saw towards position 0°.
2. Verify the angle between the blade and the
saw table with a 90° angle guide.
3. If needed, adjust the bottom position with the
adjustment screw (24) by loosening the nut
and adjusting the screw, fix the screw after
the adjustment by tightening the nut again.
4. When adjusting the 45° bottom position,
do as described above, however, adjust
with adjustment screw (25) and use a 45°
angle guide.
