DECrepeater 90TS Installation and Configuration
47
Configuring the Module (Cont.)
DECrepeater 90TS
Front panel
serial port
H8585-AC*
To OBM
device
BN25G
cable
LKG-9150-94I
H8585-AA
H8584-AA
*Not for connection to public networks in Sweden, Germany, or Japan
BN24H
cable
2. To end OBM mode and return to setup mode, do the following:
a. Connect the cable from the front-panel serial port to a setup port device.
(For more information, see the section titled Setup Port Device Cabling,
on page 17.)
b. Recycle the power to the module.
The setup port device displays the following message.
Type ctrl-C to end Out of Band Management mode.
c.
Press
Ctrl/C
on the setup port device within 30 seconds after the message
is displayed on the setup port device to end the OBM session.