Enter the number
of the slot where
the module is
installed.
20
DECrepeater 90TS Installation and Configuration
Configuring the Module (Cont.)
Start Redirect Mode
The
Start Redirect Mode
option redirects the DEChub 900 Hub Manager setup
port to the setup port of any network module that supports this function (such as the
DECrepeater 90TS) that is installed in the DEChub 900. Choosing this option allows
you to configure or obtain status of an installed network module by accessing the
module’s installation menu.
After you choose the
Start Redirect Mode
option from the
Hub Manager
INSTALLATION MENU
, the screen prompts you for a slot number, as shown in the
following code example.
The following example shows how to select a slot number (user response is shown in
boldface type):
Enter selection: 13
Enter the slot number for redirection: (1–8): 3
Return
Setup port redirected to 3: DECrepeater 90TS
Attempting to connect ...
Connection successful!
After you press
Return
, the
DECrepeater 90TS INSTALLATION MENU
appears
on your screen. Go to the section titled DECrepeater 90TS Installation Menu
(DEChub 900 Options), on page 22.