Enter the firmware image
load filename, then press
Return.
Indicates that the downline
upgrade loading process
has been initiated.
Enter the IP address
of the TFTP server,
then press Return.
Module communications
suspended during load
process. This is normal.
The module is nonfunctional only during reset and self-test
(about 1 minute of Stage 4) of the DLU process. During
the first three stages of the process, the module continues
to function as a repeater.
42
DECrepeater 90TS Installation and Configuration
Configuring the Module (Cont.)
[10] Downline Upgrade (Cont.)
The following illustration shows an (expanded) example of the setup screen displays:
Enter the Load Filename [] : detmi110.bin
Enter the Load Host IP Address [] : 16.20.54.156
Load will be initiated over the Ethernet port network interface.
The device becomes nonfunctional for up to 10 minutes
during the time that the flash load is in progress.
When the load is complete the screen displays the message:
(Device Not Responding!) This is normal.
... Press Return Key to Start Load [Ctrl/C to abort]...
DLU process started!
Module Not Responding! Connection closed!
Press Return for Main Menu ...
