Enter the module’s default gateway
IP address, then press Return.
32
DECrepeater 90TS Installation and Configuration
Configuring the Module (Cont.)
[9] Set In-Band Interface Default Gateway Address
This option prompts you for a default gateway IP address. The default gateway
address is needed only to deliver traps to a management station that is not on the
local subnet.
NOTE:
The module does not need to be configured with a
subnet mask for SNMP communications with a
management station that is located on any subnet in the
IP network.
The following is an example of a default gateway IP address:
16.07.80.156
The following is an example of the dialog associated with this option (user response
is shown in boldface type):
Enter selection : 9
DECrepeater 90TS – slot 3
SET IN-BAND INTERFACE DEFAULT GATEWAY ADDRESS
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by a ’.’ character.
example: 16.20.40.156
To delete the IP address, enter 0 in the appropriate
address field.
Default Gateway address [] : 16.07.80.156
Return
Default Gateway Address set
Press Return for Main Menu ...
