C11G (Rev. 8.2) User Manual
Revision: 01/27/2010 http://cnc4pc.com/TechDocs/C11GR8_2_User_Manual.pdf 21/21
9. Dimensions.
All dimensions are in Millimeters.
Disclaimer:
Use caution. CNC machines could be dangerous machines. DUNCAN USA, LLC
or Arturo Duncan are not liable for any accidents resulting from the improper use of
these devices. The C11G is not fail-safe device, and it should not be used in life
support systems or in other devices where its failure or possible erratic operation
could cause property damage, bodily injury or loss of life.
