67
3.
Click
Apply
to save the settings.
NOTE!
Only admin can set
Enable Password
.
If
Enable Password
is not selected, no password is required for local login at system startup.
However, a username and password are still required when you log in after a logout.
You may also set startup Wizard here by clicking
Wizard
.
Time Configuration
Time
1.
Click
Menu
>
System
>
Time > Time
.
2.
Select the correct time zone, and then set date and time formats and the system time. The
following shows an example.
3.
To use Network Time Protocol (NTP), enable NTP, set the address and port number of the NTP
server, and the update interval.
4.
Click
Apply
to save the settings.
DST
1.
Click
Menu
>
System
>
Time
>
DST
.
2.
Enable DST by selecting the check box, and then set the start time, end time, and DST bias
correctly. The following shows an example.
