63
The NVR can be set to send an email notification to specified email addresses when an alarm occurs.
The email contains basic alarm information such as alarm type, alarm time, camera ID, and camera
name, etc.
Before using this function, make sure the NVR has a functional connection to an SMTP server with
which you have a valid email account. Depending on the intended recipients, a connection to the
Internet may be required.
1.
Click
Menu
>
System
>
Network
>
.
2.
Configure the related parameters.
If server authentication is required, you need to enter the correct username and password.
NOTE!
Enter a valid SMTP server address and port number, and then select
Enable TLS
if required.
Select
Attach Image
if you want snapshots to be sent via email. Make sure Email and snapshot have
been enabled in the
Trigger Actions
window.
Only some models support image attachment. You may click Test to check whether the email can be
sent successfully.
3.
Click
Apply
to save the settings.
