manualshive.com logo in svg

cmotion cPRO hand unit, Руководство пользователя, Страница: 8 / 80

Поделиться
Скачать
cmotion cPRO hand unit Скачать руководство пользователя страница 8

All content © 2018, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 8 of 80

1.  For your safety

Before  use,  please  ensure  that  all  users  comprehensively  read,  understand,  and  follow  the 

instructions in this document.

Risk levels and alert symbols

Safety warnings, safety alert symbols, and signal words in these instructions indicate different 

risk levels:

Danger!

DANGER indicates an imminent hazardous situation which, if not avoided, will result in death 

or serious injury.

Warning!

WARNING  indicates  a  potentially  hazardous  situation  which,  if  not  avoided,  may  result  in 

death or serious injury.

CAUTION!

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor 

or moderate injury.

NOTICE

NOTICE explains practices not related to physical injury. No safety alert symbol appears with 

this signal word.

Note: Provides additional information to clarify or simplify a procedure.

Содержание cPRO hand unit

















































































Отзывы:

Нет отзывов