manualshive.com logo in svg

cmotion cPRO hand unit, Руководство пользователя, Страница: 64 / 80

Поделиться
Скачать
cmotion cPRO hand unit Скачать руководство пользователя страница 64

All content © 2018, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 64 of 80

6.2.3.7.2. 

LBUS devices

 

1 

Device ID

 

2 

Serial number

 

3 

Software version

 

4 

Bootloader version

 

5  

Radio module ID / firmware version

 

6 

Revision number

 

7 

Built date

The LBUS device ABOUT menu shows you all relevant data about the connected LBUS 

devices. Please select the LBUS device form the dynamic list of devices you want more 

information on.

Note:  Please  have  this  data  available,  if  contacting  the  cmotion  support  team  with  any 

technical enquiries.

6.2.3.7.3. 

Firmware update

The firmware update menu allows you to update your cPRO hand unit as well as other 

connected LBUS devices.

Note: In order to perform an update, a USB stick formated in ExFAT or FAT32 loaded with 

the appropriate update file for the cPRO hand unit or an other LBUS device needs to be 

inserted in the USB slot on the back side of the cPRO hand unit. The USB drive will be 

recognized and mounted automatically.

Please select cPRO hand unit if you want to update your hand unit or LBUS devices and 

the corresponding LBUS device form the dynamic list if you want to update another LBUS 

product. The update procedure is the same for any device as follows.

NOTICE

In  order  to  update  LBUS  devices,  the  cPRO  hand  unit  needs  to  be  hard-wired  to  the 

corresponding LBUS device using any LCB cable. The cPRO motor and cPRO camin can 

also be updated through their CAM interface using the cable CAM (7p) - LBUS [K2.0015760]. 

Please select the update file form the USB drive which you want to up- or down-grade to.

1

2

3

4

6

5

7

Содержание cPRO hand unit

















































































Отзывы:

Нет отзывов