All content © 2018, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 41 of 80
In order to use a pre-marked iris strips please proceed as follows:
■
Calibrate the lens motors
■
Load the corresponding lens file from the cPRO hand unit or cworld
■
Choose the right pre-marked iris strip to match the open iris value of your lens.
■
Enter the pre-marked strips menu and select the appropriate marker strip from the
list
6.2.3.2.2.3. Lock
The lock menu allows you to lock the slider (e.g. if shooting with a locked off camera).
A small red lock will be displayed in the status bar on all main screens. The letter “S” for
slider will illuminate each time you turn the knob. The slider illumination will start flashing
red, indicating that the slider is locked and no motor control is possible.
6.2.3.2.3.
Joystick
The joystick menu contains all settings related to the joystick control interface and consists
of:
Control (status)
Sensitivity
Speed
Lock (status)
6.2.3.2.3.1. Control
The control menu allows you to assign the axis you want to control (Focus / Iris / Zoom) to
the joystick. If you select Off, the joystick will have no control over any axis and will turn
the illuminated position inticator off.
6.2.3.2.3.2. Sensitivity
The sensitivity menu allows you to adjust the touch sensitivity of the micro-force joystick
to Min, Mid or Max. At Min, the joystick needs more preasure to react. At Max, the joystick
will respond to a lighter touch.