closomat Asana, Руководство по эксплуатации

Страница: 11 / 32

11
6. SHOWER FUNCTION
6.1. BIDET FUNCTION
After a bowel movement, don’t reach for toilet paper, simply remain
seated upright. After activating the bidet function push-button, the
shower spray arm extends and the shower system is activated. When
the shower spray arm has reached the right position, the shower
process starts with a gentle shower jet. Please make sure that you are
sitting far enough back. Particular attention should be paid to this if
children are using they toilet, as they tend to sit further forwards. There
is a short time delay, as WC flushing starts automatically after the start
of the washing phase to ensure that the wellness phase (showering
followed by warm air drying) takes place after the bowl has been flushed
clean. Afterwards the shower nozzle is retracted into its protected
storage position, and in the process is sprayed clean. The warm air
drying process then starts automatically, and lasts for approx. 3
minutes.
There are two ways of starting the bidet function process:
- Keep the bidet function push-button pressed in
- Touch the bidet function push-button
a) Keep the bidet function
push-button pressed in
(Photo B)
When seated, press the raised
front push-button with your right
hand (Photo B) and keep it
pressed in. Showering will now
continue until the push-button is
released (max. 1 minute).
Afterwards the warm air drier
starts automatically.
b) Touch the bidet function
push-button
(Photo C)
When seated, press the raised
front push-button lightly with your
right hand and release (Photo C).
The bidet function process
described above will now run
automatically (showering process
approx. 30 seconds). Afterwards
the warm air drier starts
automatically.
NB:
By touching the same push-
button again, or simply by
standing up, the showering or
drying process can be stopped
midway.
11