closomat Asana, Руководство по эксплуатации

Страница: 20 / 32

20
20
13. CARE AND CLEANING
CLOSOMAT should be cleaned by hand like a conventional toilet. The
bowl is made of high-quality sanitaryware porcelain and should be
cleaned with products that contain no bleach. Similarly, for the stainless
steel heads of the shower and warm water nozzles. If WC brushes are
used and strong descaling agents are left in the bowl to work, the seat
and lid should be raised. Do not use any permanent WC-deodorising
agents, either on the flushing rim or cistern (for environmental reasons
and to prevent blockages in the outflow). Ensure that the slot and
apertures 1 (Photo T) below the “enclosed” flushing rim remain free from
limescale deposits so that the full flushing action is always possible.
WARNING
Wear gloves during cleaning work,
and protect eyes from spray.
If the shower head fails to return
to its normal storage position
even after initialisation (switch
unit on and off again after 30
seconds), please contact
customer services.
13.1 SHOWER NOZZLE (PHOTO U)
The shower spray head which extends and retracts telescopically does
not get dirty either in its working position or when concealed. There is
also an integral system which sprays the nozzle every time it retracts.
If you nevertheless wish to make the nozzle accessible for cleaning
purposes, it can be extended “dry” as follows: when no weight is on the
seat, press the front push-buttons on the left and right simultaneously
for at least 2 seconds. The nozzle will remain in this position for 10
minutes before it automatically retracts and the warm air spray (Photo
V) extends out (13.2).