closomat Asana, Руководство по эксплуатации

Страница: 12 / 32

12
12
If you wish to change the pre-set showering time, this can be done as
follows (setting range from 15 - 45 sec.): whilst the bidet function is on
(hold push-button pressed in), press both push-buttons (front and rear)
simultaneously with your left hand (Photo D) and keep them pressed in.
When you reach the desired showering time, release the shower button
with your right hand (Photo E) , and then also release both push-buttons
with your left hand. The new bidet functioning time is now programmed
in.
6.1.1 BOOST BIDET FUNCTION JET
If during the showering process described above you would like to
change the intensity of the jet, e.g. for a deeper cleaning effect or to
enjoy an invigorating water jet massage, you can adjust it as follows:
Boost intensity:
Whilst the shower is running,
touch the raised front push-button
once or several times with your
left hand until it reaches the
required intensity (Photo F).
Reduce intensity:
Whilst the shower is running,
touch the recessed rear push-
button once or more with your left
hand until it reaches the required
intensity (Photo G).
NB:
After use, the system returns to its
standard settings.