closomat Asana, Руководство по эксплуатации

Страница: 10 / 32

10
10
3. USE AS A STANDARD WC
Start standard WC flush: press or activate one of the two flush buttons on the
above flush-plate.
4. CLOSOMAT READY TO OPERATE
The CLOSOMAT is ready to operate when the main switch 1 (On/Off) on the
unit is switched on and the power supply is guaranteed. This switch is located
in the control panel behind the aperture for the active carbon filter drawer
(Photo A). The unit always remains switched on. For longer periods of non-use
(more than about 5 days), it is recommended that the unit is switched off. As
soon as the unit is switched on, a short initialisation programme runs during
which CLOSOMAT must not be used, and the orientation light (blue) and
operating light
3 (yellow) flash. The economy button 2 also flashes, which
indicates that the boiler is heating up. The shower system is activated and
becomes ready to operate only when someone sits on the seat.
5. ODOUR EXTRACTION
Odour extraction is activated as soon as someone sits on the particularly ergonomic and comfortable
warm-touch seat. Unpleasant odours are extracted from the inside of the bowl, passed through an active
carbon filter and blown back into the room as “neutralised” air. This function remains activated either
until the person stands up, or touches the odour extraction Stop button (seated: left hand, front push-
button) or the shower function is started (seated: right hand, front push-button).