Cloos GLW 322, Инструкция по эксплуатации и запасные части

Страница: 5 / 39

Cod.006.0001.1861
01/09/2014 v2.0
ENGLISH
GLW 322
4/38
1 INTRODUCTION
IMPORTANT!
This handbook must be consigned to the user prior to
installation and commissioning of the unit.
Read the "General prescriptions for use" handbook supplied
separately from this handbook before installing and
commissioning the unit.
The meaning of the symbols in this manual and the associated
precautionary information are given in the "General
prescriptions for use”.
If the "General prescriptions for use" are not present, it is
mandatory to request a replacement copy from the manufacturer
or from your dealer.
Retain these documents for future consultation.
KEY
DANGER!
This pictogram warns of danger of death or serious injury.
WARNING!
This pictogram warns of a risk of injury or damage to property.
CAUTION!
This pictogram warns of a potentially hazardous situation.
INFORMATION
This pictogram gives important information concerning the execution
of the relevant operations.
This symbol identifies an action that occurs automatically as a
result of a previous action.
This symbol identifies additional information or a reference to a
different section of the manual containing the associated
information.
§ This symbol identifies a reference to a chapter of the manual.
*1 The symbol refers to the associated numbered note.
NOTES
The figures in this manual are purely guideline and the images may
contain differences with respect to the actual equipment to which they
refer.
INTRODUCTION
GLW 322 is an advanced technology three-phase welding power
source for AC and DC TIG welding operations.
Mild steel, stainless steel and copper can be easily welded in DC TIG.
AC TIG functions are ideal for aluminum, magnesium and related
alloys welding.
AC TIG welding is optimized thanks to:
-
Synergic arc ignition selection located on the front panel, it modifies
the ignition according to electrode diameter.
- Extra fusion function maximizes arc focusing for considerable thin
material in AC TIG welding.
- Mixed AC/DC increases arc penetration for thick aluminum plates.
- Pulsed AC TIG mode which prevents the risk of deformation of the
workpiece in the case of prolonged welding operations.
Up to 6,00 mm diameter electrode welding is possible in MMA.
Fan. The fan is turned on only during welding, at the end of the
welding process it remains on for a fixed period of time according to
welding conditions.
The fan is nonetheless controlled by specific thermal sensors that
guarantee a correct cooling of the machine.
Accessories/ancillary devices that can be connected to the unit:
- UP/DOWN torch or torch with potentiometer to adjust the welding
current from a distance.
- Manual remote controller for remote adjustment of the welding
current.
- Foot-pedal remote controller for TIG torch arc striking and remote
adjustment of welding current.
The maximum and minimum TIG welding current values can be
set with the foot pedal controller.
If both remote controllers are connected, the foot pedal assumes
priority over the UP/DOWN or potentiometer TIG torch.
- Liquid cooler for TIG torches.
- Power source trolley.
Consult your dealer for an updated list of accessories and the latest
available new products.