CLIVET WSN-XIN 101, Инструкция по установке и эксплуатации

Страница: 44 / 72

44 WSN-XIN 21-141 M0V940M13-06
8.22 Led inverter
The access is riserve to the service centres.
Danger of electrocution.
Led:
ON: normal operating
Slow flashing (ON 1sec.,OFF 0.5 sec.): stanby compressor stopped
Fast flashing (ON 0.2 sec.,OFF 0.2 sec.): in alarm.
8.23 Status
Main menuSETAi, di, AO, dOAi L1
Menu Code Description
Ai
AiE1 DHW temperature
Ai L1 Primary outlet temperature
Ai L2 Primary inlet temperature
Ai L3 Coil temperature
Ai L4 High pressure transducer
Ai L5 Outside temperature
1Ai 1 Low pressure transducer (thermostatic sensor on the driver)
1Ai 2 Return temperature (thermostatic sensor on the driver)
1Ai 3 Discharge temperature (thermostatic sensor on the driver)
of
di L1 High pressure
di L2 Compressor Alarm
di L3 Flow user side
di L4 Remote On-Off
di L5 Remote Heat/Cool
AO
AO L1 Primary pump (it is a digital 0/1)
AO L2 Fan signal (standard version)
AO L3 Compressor signal
AO L4 Primary pump signal (if in variable flow )
AO L5 Fan signal (High-efficiency version)
dO
dOE1 DHW heater (if present)
dO L1 DHW valve
dO L2 Reversing valve refrigerant circuit
dO L3 Frost Heater
dO L4 Auxiliary heater
dO L5 Compressor start
dO L6 Cumulative alarm
E1
1rE1 Superheating temperature
1rE2 Condensing saturate temperature
1rE5 Superheating
1rE6 Gas pressure (=1Ai1)
1rE7 Opening percentage electronic thermostatic valve
1SP4 Superheating Setpoint
Sr Actual Setpoint: setpoint with compensation / operating limit
Hr
CP01 Compressor 1 operating hours: x 10
PU01 Hours utility pump: x 10