CLIVET WSH 100D, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 48

26
7 - CONTROL
An alarm list is associated with the inputs of each electronic module of the unit.
On the display appears a code that identifies the electronic module and the alarm code.
Example :
U_1 CMP_1 E105
U_1 CMP_1 = compressor 1 module
E105 = high pressure alarm
CENTRAL (CEN)
list of alarms
Unit_1 (U_1)
Mod_comp1 (CMP1_1)
list of alarms
Mod_comp2 (CMP_2)
list of alarms
ALARM STRUCTURE
CENTRAL MODULE
E001 H2O IN temp. probe fault on control module
E002 H2O OUT temp. probe fault on control module
E003 Outside air temp. probe fault
E004 Water Reset input fault
E005 Outside RH% probe fault
E006 Thermal cut-out alarm pump 1 on control module
E007 Thermal cut-out alarm pump 2 on control module
E008 Flow switch alarm on control module
E009 System pressure alarm
E010 Phase monitor alarm
E011 Antifreeze alarm on control module
E012 Antifreeze pre-alarm on control module
E013 Change CENTRAL pump
E014 Unit configuration alarm
E015 Demand Limit input fault
E016 Can net disconnectedness on control module
E017 Inhibits control in heating
E018 Incongruent deltaT alarm
E019 Ext low temperature alarm
COMPRESSOR MODULE
E101 Cond./ Evap. temp. probe fault
E102 Condensing pressure probe fault
E103 Evaporation pressure probe fault
E104 Recovery temp. probe fault
E105 High pressure alarm
E106 Low pressure alarm
E107 Fan/Pump thermal cut-out alarm
E111 Cond. / Evap. H2O flow alarm
E112 High pressure pre-alarm 1
E113 High pressure pre-alarm 2
E114 Low pressure pre-alarm
E115 Force defrost alarm
E116 Max Press. diff. alarm
E117 Recovery H2O flow alarm
E118 Heat recovery HP pre-alarm
E108 Compressor 1 thermal cut-out alarm
E109 Compressor 2 thermal cut-out alarm
E110 Compressor 3 thermal cut-out alarm
E213 Module not connected
E119 Oil differential pressure alarm
E120 Condenser frost alarm
E121 BP2 prealarm
E123 TA TEE alarm
E124 TS TEE alarm
E125 max TS TEE prealarm
E126 max TS TEE prealarm
E127 power fail alarm
E128 stepper motor error alarm