CLIVET WSH 100D, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 48

6
2 - RECEPTION
Operate in compliance with safety regulations in force .
For detailed information (dimensions, weight, technical
characteristics etc.) please refer to the TECHNICAL
INFORMATION section.
Use single protection devices : gloves, glasses etc
2.1 PRELIMINARY INFORMATION
2.2 DELIVERY CONTROL
2.4 HANDLING
Check the position of the centre of gravity in the TECHNICAL
INFORMATIONS—DIMENSIONS section.
Use protections not to damage the unit.
Observe external packaging instructions .
Be careful not to damage the unit.
Recycling and disposing the packaging material in
conformity with local regulations
.
2.3 STORING
Verify unit weight and handling equipment lifting
capacity .
Identify critical points during handling (disconnected routes,
flights, steps, doors
).
Check the position of the centre of gravity in the TECHNICAL
INFORMATIONS—DIMENSIONS section.
Before starting the handling, make sure that the unit is stable
.
2.5 PACKAGING REMOVING
Lifting beam with spacers
Before accepting the delivery you have to check:
•
that the unit hasn’t been damaged during
transport
•
that the materials delivered correspond with that
indicated on the transport document comparing the
data with the identification label positioned on the
packaging.
In case of damage or anomaly:
•
write down on the transport document the
damage you found and quote this sentence:
"Conditional acceptance — clear evidence of
deficiencies/damages during transport".
•
Contest by fax and registered mail with advice of
receipt to supplier and the carrier.
Any disputes must be made within the 8 days owing the
delivery. Complaints after this period are invalid.
A
A
B