Climax SHARK FIN DEFENDER, Руководство по эксплуатации

Страница: 32 / 62

Page 20 Defender Clamshell Operating Manual
5.3 M
AINTENANCE TASKS
Maintenance tasks are described in the following sections.
5.3.1 Check the PCU oil reservoir levels
Do the following to check the PCU oil reservoir levels:
1. Check the PCU oil reservoir levels.
2. Refill as necessary. See Table 5-1 on page 19 for information on recom-
mended lubricants.
3. Check that the oil drip rate is set at six drops per minute.
5.3.2 Empty the air filter water trap
Check and drain the water from the air filter water trap.
5.3.3 PCU emergency stop check
Do the following to check the emergency stop:
1. With the machine running, press the emergency stop button.
2. Check that the machine stops.
3. Reset the emergency stop by twisting and then pulling the button up.
4. Check the machine doesn’t restart.
5.3.4 PCU drop-out circuit check
The PCU drop-out circuit prevents the machine from restarting unexpectedly after
air supply to the PCU is lost and restored. Do the following to check the PCU
drop-out circuit:
1. Check that the PCU is connected to an air supply and to the Clamshell
Machine.
2. Set the speed adjustment valve to zero
3. Check that the Emergency-Stop is disengaged (that is, pulled up).
4. Press the START button.
5. Slowly open the PCU speed adjustment valve until the rotary drive
engages.
Machine surfaces
LPS PreSolve
Orange degreaser
(cleaner to remove
LPS 3)
N/A N/A As required
T
ABLE
5-1. A
PPROVED LUBRICANTS
Application Area Lubricant
Biodegradable Lubri-
cant
Viscosity
(cSt)
Quantity